Partial Partial Replacement Of Fine Aggregate By Slag Sand

steel slag as partial replacement of fine aggregate. For this purpose different test on harden concrete were conducted at the age of 28 days like compressive strength on 150 x 150 x 150 mm size cube, splitting tensile strength on 150 mm X 300 mm cylinder

Get Price

Blog Show

stock
  • Partial replacement of fine aggregate by steel slag and

    Partial replacement of fine aggregate by steel slag and

    Jan 01, 2021 Durability tests were conducted for 40% steel slag replaced concrete. The weight and strength loss in cubes after immersion in salt (NaCl), acid (HCl) and sulphate (MgSO4) was very low. So the concrete with partial replacement of fine and coarse aggregate by steel slag and walnut shell shows better resistance in salt, acid and sulphate. •

    read more
  • A INVESTIGATIONAL STUDY ON PARTIAL

    A INVESTIGATIONAL STUDY ON PARTIAL

    aggregate and fine aggregate to steel slag and Eco-sand. 1.1 Scope of the Project: Steel slag as partial replacement to coarse aggregate and Eco-sand to river sand shows economical, technical and energy saving benefits. To check its properties for concrete which is

    read more
  • Partial Replacement of Steel Slag Aggregates in Concrete

    Partial Replacement of Steel Slag Aggregates in Concrete

    Dec 31, 2018 In this study, an attempt has been made to investigate the effect of partial replacement of conventional river sand with steel slag aggregate. The replacement of river sand by slag aggregate provides dual advantage of reducing disposal problems in

    read more
  • Effect of iron slag as partial replacement of fine

    Effect of iron slag as partial replacement of fine

    Dec 15, 2016 Fine aggregate (river sand) River sand was used as fine aggregate, and satisfied the requirements for grading zone-II of BIS: 383-1970 . Its specific gravity and fineness modulus values were 2.57 and 2.64 respectively. 2.1.3. Coarse aggregate. Locally available gravel of 12 mm size was used as coarse aggregate. Its specific gravity was 2.69 and

    read more
  • Study on the partial replacement of fine aggregate

    Study on the partial replacement of fine aggregate

    concrete made with partial replacement of fine aggregate using induction furnace slag was considered. For the experimental investigation, mixes were prepared with fine aggregate replacement using 20 percent, 30 percent, 40 percent, 50 percent and 60 percent induction furnace slag. Compressive strength test on mortar and concrete

    read more
  • Experimental Study on Partial Replacement of Copper

    Experimental Study on Partial Replacement of Copper

    of concrete with partial and fully replacement of copper slag and partial replacement of cement by Fly Ash and its compare with controlled cubes. Fine Aggregates are replaced by copper slag for various percentages 20%, 40%, 60%, 80% and 100% and cement with additionally used material of Fly

    read more
  • An Experimental Investigation on Partial Replacement of

    An Experimental Investigation on Partial Replacement of

    Mar 09, 2020 An Experimental Investigation on Partial Replacement of Cement with Rice Husk Ash and Fine Aggregate with Steel Slag - written by Insha Ali , Dr. Esar Ahmad published on 2020/09/03 download full article with reference data and citations

    read more
  • Influence of Copper Slag in Concrete as Partial

    Influence of Copper Slag in Concrete as Partial

    Influence of Copper Slag in Concrete as Partial Replacement for Fine Aggregate N. Vinoth Kumar1 S. K. Divya2 A. Sattainathan Sharma3 1,2,3Assistant Professor 1,2,3Department of Civil Engineering 1,2,3Valliammai Engineering College, Kancheepuram, India Abstract—Concrete is the widely used construction material

    read more
  • Utilization of Copper Slag in M-Sand as Partial

    Utilization of Copper Slag in M-Sand as Partial

    investigation carried out on concrete with partial replacement of fine aggregate by copper slag, Concretemixes, viz. Conventional concrete mixes with varying percentages of copper slag (10, 20, 30 and 40%) as fine aggregate replacement material were investigated. The compressive strength test was carried out on 4

    read more
  • Development of Innovative Green Self-compacting Concrete

    Development of Innovative Green Self-compacting Concrete

    Nov 06, 2020 Development of Innovative Green Self-compacting Concrete with Partial Replacement of Fine and Coarse Aggregate by Using Slag

    read more
  • Partial Replacement of Cement with Corn Cob Ash and

    Partial Replacement of Cement with Corn Cob Ash and

    this study was undertaken to evaluate the effect of partial replacement of natural sand with steel slag (SS) in concrete. Experimental programme was conducted using 0%, 10%, 15% and 20% partial replacement of fine aggregate with stone dust has been taken for concrete of M30 grade with 0.45 water cement ratio. In this study, set

    read more
  • Partial Replacemnt of Fine Aggregate With Iron Slag

    Partial Replacemnt of Fine Aggregate With Iron Slag

    partial replacement of fine aggregate. with iron slag and coarse aggregate with expanded polystyrene beads by: 1.m.yaswanth kumar 2.g.sai kumar 3.ch.naveen kumar 4.k.manikanta 5.j.gandhi krishna under the guidence: mr.r.phanindra assistant professor dept. of civil engineering nriit abstract • we are developing a new structural concrete member by

    read more
  • Experimental study on partial replacement of cement by

    Experimental study on partial replacement of cement by

    The main aim of this paper is to evaluate the performance of concrete by partial replacement of cement with Prosopis Juliflora Ash and Fine aggregate with Steel Slag. Steel Slag is an industrial waste which is generated during the production of steel. In India, annual outcome of Steel Slag is about 10 Million Tonne.it is very important to utilize these waste in order to avoid the land

    read more
  • Partial Replacement of Copper Slag as Fine Aggregate

    Partial Replacement of Copper Slag as Fine Aggregate

    concrete with partial replacement of fine aggregate by copper slag with various percentages of 0%, 10%, 15% and 20%. The specimens were casted for 7days, 14 days and 28 days then tested. The results are presented above. V. REFERENCES [1] Al-Jabri, K. and Makoto Hisada. “Copper slag as sand replacement for high performance concrete”, Cement & Concrete Composites, Vol. 31, pp. 483

    read more
  • Study of Partial Replacement of Fine Aggregate by Iron Slag

    Study of Partial Replacement of Fine Aggregate by Iron Slag

    possibilities of using iron slag as partial replacement of fine aggregate (sand) by iron slag. Iron slag was used to replace 25% to 30% of sand by weight at

    read more
  • Experimental Study on Partial Replacement of Fine

    Experimental Study on Partial Replacement of Fine

    3. Finess test Concrete mix is designed as per I.S codal provision for M20 grade. Slump & Workability tests are to be done. Fine aggregate is replaced by steel slag form 0% to 30% in steps of 10%.After casting, compressive strength test at 28days curing are to be conducted & compared with conventional concrete

    read more
  • Experimental Investigation on Partial Replacement of

    Experimental Investigation on Partial Replacement of

    utilizing the steel slag as a partial replacement material for natural fine aggregates in M20 grade concrete and also studied the mechanical properties of M20 grade concrete with steel slag as partial replacement material to fine aggregates. This experimental work concluded that using

    read more
  • Study on the partial replacement of fine aggregate using

    Study on the partial replacement of fine aggregate using

    replacement of fine aggregate using steel slag was adopted to be 60 percent. Dolomite based concrete mixture was studied as a reference mixture and the results revealed that the mechanical properties of concrete made with

    read more
  • EXPERIMENTAL STUDY ON PARTIAL REPLACEMENT OF

    EXPERIMENTAL STUDY ON PARTIAL REPLACEMENT OF

    slag, a waste material obtained from AGNI Steel Industry- Ingur, in concrete as a partial replacement material for sand. Slag fines may be used as a substitute for sand without any deleterious effect. Volume stability, good sulphate resistance, 1.5 RESEARCH SIGNIFICANCE IN INDIAN CONTEXT Presently, use of slag in India is to the tune of 15 to

    read more
  • STEEL SLAG AS REPLACEMENT OF FINE AGGREGATE IN

    STEEL SLAG AS REPLACEMENT OF FINE AGGREGATE IN

    steel slag to evaluate the effectiveness of the use of steel slag as a partial replacement in sand To replace Sand with various percentages 10, 20, 30, 40% of steel slag waste in M25, M30 & M35 concrete. Investigation have been carried out to study the effect of steel slag on various property of concrete like compressive, split tensile

    read more
Click avatar to contact us
Click avatar to contact us
gotop